Author Topic: NHD-5.0-800480TF-ATXL linux driver code  (Read 2333 times)

carloval

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-5.0-800480TF-ATXL linux driver code
« on: March 27, 2015, 03:52:21 AM »
Good Day!.

I'm trying to integrate the NHD-5.0-800480TF-ATXL with our development board with a Phytec 052 SOM.
I would like to ask if we have some linux driver code where i can use.
If not, can you guide me where to start.


Thanks


Paul_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 251
  • Karma: 16
    • View Profile
Re: NHD-5.0-800480TF-ATXL linux driver code
« Reply #1 on: March 27, 2015, 08:20:26 AM »
Hello,

Iím sorry, unfortunately we do not have any Linux drivers available for the TFT, except for the FocalTech CTP drivers.

I am not to familiar with the Phytec 052 SOM, does this board have a built in TFT controller? If not you will need to use an external one.  There are several TFT controllers on the market (the SSD193 being one of them) so you may use whatever you prefer.

Finally, I highly recommend checking out Phytec's wiki page, I'm sure you will find some useful information.

http://phytec.com/wiki/index.php?title=Main_Page

Hope this helps!





 

NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 2203
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 2014
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3561
Last post September 25, 2015, 03:09:24 PM
by Paul_B
help! NHD-4.3-480272EF-ATXL#-T touch panel rotates 90 degrees

Started by knightsunBoard TFTs

Replies: 3
Views: 1323
Last post September 26, 2016, 11:58:01 PM
by knightsun
Question about FT5x06 controller (NHD-7.0-800480EF-ATXL-CTP)

Started by DominusDRRBoard TFTs

Replies: 5
Views: 3839
Last post May 15, 2015, 10:04:11 AM
by DominusDRR