Author Topic: Enabling Built In Self Test - BIST  (Read 1787 times)

wilens

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
Enabling Built In Self Test - BIST
« on: May 09, 2015, 08:26:42 AM »
For the NHD-7.0-800480EF-ATXV, I noticed that the HX8264‐D02 Source Driver has a BIST pin (Built In Self Test). There is no pin like this on the 40-pin TFT connector; but I was wondering if perhaps one of the traces or resistors on the flex circuit was connected to this pin which would allow me to easily test the product?

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: Enabling Built In Self Test - BIST
« Reply #1 on: May 12, 2015, 09:08:29 AM »
Hello,

I'm sorry, the BIST (Built In Self Test) pin is not accessible through the FPC cable.

 

Map of test points on the back of a display?

Started by oozitronBoard Character LCDs

Replies: 1
Views: 2397
Last post June 09, 2014, 08:45:57 AM
by Michael_L
Test mode for NHD-0420CW-xxx displays?

Started by LoyalServantBoard OLEDs

Replies: 8
Views: 3066
Last post May 06, 2016, 12:54:49 PM
by Saurabh_B
NHD-0420CW-AG3 Pixel Test

Started by markdpendBoard OLEDs

Replies: 6
Views: 3499
Last post June 05, 2015, 07:39:57 AM
by Paul_B
NHD-C0220BiZ-FS(RGB)-FBW-3VM Test

Started by DeanBoard Character LCDs

Replies: 4
Views: 3475
Last post May 16, 2014, 04:50:24 PM
by SteveC