Author Topic: Random pixels at turn on, and can't change page continuously.  (Read 1963 times)

sdb_chris

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Hi, my screen is NHD-C12865AR-FSW-GBW. After initialization and turn on, I see random pixels turned on. I try to clear the RAM by going in every column of every page and write 0x00, but the bytes are only written in the first page of the display. Sometimes, what is supposed to be written in the second page overwrites about 3 pixels of what is written at the end of the first page.

EDIT : I just realized that something makes my A0 GPIO unable to change state from Data to command, which makes me unable to send a command between the data display.
« Last Edit: May 21, 2015, 09:15:51 AM by sdb_chris »

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: Random pixels at turn on, and can't change page continuously.
« Reply #1 on: May 28, 2015, 07:30:42 AM »
Correct, you would need to be able to change that pin to be able to send the command to change the page.  Why are you unable to change it?

 

NHD-2.7-12864UCY3 Uneven brightness depending on neighboring pixels

Started by mikaeleimanBoard OLEDs

Replies: 3
Views: 936
Last post November 22, 2016, 06:16:42 AM
by mikaeleiman
FSTN(-) 128x64 pixels 66x33 mm with RED color?

Started by alex5Board Graphic LCDs

Replies: 1
Views: 1585
Last post May 23, 2016, 08:53:47 AM
by Saurabh_B
MOVED: NHD-0 420D 3Z- FL-GBW Backlight brightness won't change .

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 1948
Last post November 17, 2015, 11:25:04 AM
by Saurabh_B
TFT LCD pixels sticking / burning

Started by bossBoard TFTs

Replies: 1
Views: 2311
Last post December 15, 2014, 05:20:47 PM
by Michael_L
NHD-0 420D 3Z- FL-GBW Backlight brightness won't change .

Started by samuelproulxBoard Character LCDs

Replies: 4
Views: 2267
Last post November 29, 2016, 07:59:51 AM
by Paul_B