Author Topic: Repalcing NHD-0420D3Z-FL-GBW v1.0 with v3  (Read 1925 times)

sbrad

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Repalcing NHD-0420D3Z-FL-GBW v1.0 with v3
« on: June 15, 2015, 04:28:00 PM »
Having problems with the display on a piece of equipment that has the version 1.0 board, will I be able to just install the v3 board in it's place with no modifications?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: Repalcing NHD-0420D3Z-FL-GBW v1.0 with v3
« Reply #1 on: June 16, 2015, 02:21:56 PM »
It is possible this will work, depending on your current timing.  The V3 firmware is more robust, but has longer execution times for each command.  Delays may need to be added after send commands / data to the display.

 

RS232 PIC CCS COMPILER COMANDS FOR NHD-0420D3Z-NSW-BBW-V3 ISSUE

Started by DavidVMBoard Character LCDs

Replies: 2
Views: 639
Last post May 30, 2017, 12:58:32 PM
by DavidVM
NHD-0420D3Z-NSW-BBW-V3 i2c display and Arduino missing characters

Started by 0miker0Board Character LCDs

Replies: 0
Views: 651
Last post July 06, 2017, 11:05:59 AM
by 0miker0
NHD-0420D3Z-NSW-BBW-V3 back-light flickers

Started by rickford66Board Character LCDs

Replies: 3
Views: 3449
Last post May 06, 2015, 08:34:09 AM
by fraryb
Changing the Slave Address with NHD-0420D3Z

Started by alkBoard Character LCDs

Replies: 2
Views: 2550
Last post January 13, 2015, 01:53:20 PM
by alk
Trouble with serial interface on NHD-0420D3Z-FL-GBW-V3

Started by chughesBoard Character LCDs

Replies: 4
Views: 2924
Last post September 29, 2015, 11:16:48 AM
by Paul_B