Show Posts
1
TFTs / Using NHD-1.8 Displays with a FFC connector
« on: November 14, 2016, 08:11:04 AM »
Hi,
im currently designing a PCB which will connect to several NHD-1.8 displays. I have to make the connection between the display and the PCB myself, and i don't have equipment to do hot-bar soldering. My initial plan was to use a normal FFC connector instead, but it seems that the 0.8mm pitch of the displays FFC is non standard.
Are there any FFC connectors available that are known to work with the NHD-1.8 FFC?
Thanks!
im currently designing a PCB which will connect to several NHD-1.8 displays. I have to make the connection between the display and the PCB myself, and i don't have equipment to do hot-bar soldering. My initial plan was to use a normal FFC connector instead, but it seems that the 0.8mm pitch of the displays FFC is non standard.
Are there any FFC connectors available that are known to work with the NHD-1.8 FFC?
Thanks!