Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: Garyio on August 27, 2015, 05:40:28 PM

Title: NHD-4.3-480272EF-ATXL#-T FFC Connector
Post by: Garyio on August 27, 2015, 05:40:28 PM
In the NHD-4.3-480272EF-ATXL#-T Datasheet it shows the recommended LCD connector on page4 to be a Molex p/n: 54132-4097 but on the NHD web site it shows a Molex 54104-4031 to be used with this display. I see they are almost the same but the first one is a Bottom contact and the second is a top contact. Which one should I use? I can't find any of the 54132-4097 but I have found a compatible alternative bottom contact 54132-4062. Will that work?
Title: Re: NHD-4.3-480272EF-ATXL#-T FFC Connector
Post by: Saurabh_B on August 28, 2015, 08:08:37 AM
Hi,

Either the 54104-4031 or the 54132-4062 will work just fine, The deciding factor is where you would be likely to mount the display. On our controller they use a top contact FFC connector because it is often attached onto the bezel of the display.