Newhaven Display Forum

Newhaven Products => Graphic LCDs => Topic started by: evandro.bubiak on October 01, 2015, 08:39:13 PM

Title: NHD-C160100DiZ-FSW-FBW 3D model and assembly
Post by: evandro.bubiak on October 01, 2015, 08:39:13 PM
Is there a 3d model for the NHD-C160100DiZ-FSW-FBW?
How is it fixed on my case?
Title: Re: NHD-C160100DiZ-FSW-FBW 3D model and assembly
Post by: Saurabh_B on October 02, 2015, 08:36:39 AM
HI,

To get the 3D model for this display please email a request to nhtech@newhavendisplay.com.

There are multiple ways to mount it onto your case, You could create an enclosure with an opening for the display to house it, or even use some double sided tape to fix it into place.

To connect it to your mpu you would need the Molex 52892-1433 (http://www.newhavendisplay.com/molex528921433-p-1568.html) connecter mounted onto a pcb such as the NHD-COG14-36 (http://www.newhavendisplay.com/nhdcog1436-p-1107.html).