Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: tracyb on October 09, 2015, 04:11:39 AM

Title: Connector type on NHD-2.7-12864UCY3
Post by: tracyb on October 09, 2015, 04:11:39 AM
Hi,

I am aware that there is a 20 pin header with a 2.54mm pitch on the board and have used that successfully. However there is a smaller pitch header on the board with a 1mm pitch that is surface mount. This one is vastly superior and using FF cables is what I want to do.

What part number connects to this surface mount header?
Title: Re: Connector type on NHD-2.7-12864UCY3
Post by: Paul_B on October 09, 2015, 08:07:04 AM
Hello,

Please see the part numbers below:

Molex Part# (20-Pin 1.0mm Pitch Top Contact):
52207-2060

Molex Part# (20-Pin 1.0mm Pitch Bottom Contact):
52271-2069

Feel free to contact me if you have any questions  ;)
Title: Re: Connector type on NHD-2.7-12864UCY3
Post by: matt11 on May 20, 2016, 01:35:56 PM
Hi Paul_B,

Are you an employee of Newhaven?

If so, I noticed on a picture of the NHD-2.7-12864UCY3 display, this 1 mm footprint is covered by a sticker. Is this how the boards are sold? I'm concerned from a manufacturing point of view. Is there an option to purchase this board with the 1 mm connector already mounted?
Title: Re: Connector type on NHD-2.7-12864UCY3
Post by: Saurabh_B on May 23, 2016, 08:49:59 AM
Hi Matt,

You would be able to purchase this display with the 1-mm connector soldered on to the display.
Depending on how many you order we can provide a quote for the part.

If you are ordering one or a few you can simply add the following to your cart:
- NHD-2.7-12864UCY3 (http://www.newhavendisplay.com/nhd2712864ucy3-p-3621.html)
- Molex_52271-2079 (http://www.newhavendisplay.com/molex522712079-p-2849.html)
- Soldering Fee (Please add this to the notes)