Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: Spyy on December 31, 2018, 06:42:06 AM

Title: NHD-3.5-320240FT-CSXN-T change to portrait
Post by: Spyy on December 31, 2018, 06:42:06 AM
Hi,

I have the above mentioned display and i want to change the resolution to portrait mode. It has 320*240 and i changed the following parameters:
REG_ROTATE from 0 to 3
Now it is portrait but i can not see the entire screen. I tried:
REG_HSIZE from 320 to 240
REG_VSIZE from 240 to 320
After doing this the screen stays black. So...are there other parameters that i have to change to get it into portrait ?


Thank you for your help

Torsten