Newhaven Display Forum

Newhaven Products => Character LCDs => Topic started by: AJS@UltraClenz on September 04, 2014, 01:12:20 PM

Title: NHD‐C0216CZ‐FSW‐FBW‐3V3
Post by: AJS@UltraClenz on September 04, 2014, 01:12:20 PM
I'm designing a tool that will use the above display, My question is there a method to selecting the value of the capacitor that is connected in between pin 9 and 10 of the display? The table on page 4 of the data sheet gives a range of 0.47uF to 2.2uF.
Title: Re: NHD‐C0216CZ‐FSW‐FBW‐3V3
Post by: Michael_L on September 08, 2014, 09:22:04 AM
Any cap within that range will be suitable.  For your reference, we typically use a 1.0F cap for this.