Newhaven Display Forum

Newhaven Products => Evaluation Tools => Topic started by: pbatten on June 23, 2016, 04:39:47 PM

Title: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: pbatten on June 23, 2016, 04:39:47 PM
I'm having problems the NHDev Development Board with NHD-2.4-240320CF-CSXN#-F display
I'm getting ghosting and tearing on the display.
Title: Re: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: Saurabh_B on June 24, 2016, 07:56:09 AM
Could you tell me how you have the display connected. Are you using our Cable for the NHDev Development Board, and what display you are selecting on the NHDev Development Board.
Title: Re: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: pbatten on June 27, 2016, 02:25:28 PM
I'm selecting the 2.4-240320CF display.
The cable I made myself
I'm pretty confident its correct but I'll check again.
Is there a wiring diagram available I just went by the data sheets?
Title: Re: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: Saurabh_B on June 28, 2016, 08:18:56 AM
This display will communicate with an 8-Bit Interface.
Use the wiring diagram attached below:
Title: Re: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: pbatten on June 28, 2016, 02:41:07 PM
Great that fixed it
I thought it required a 16 bit Buss as the SF version display does.
There is a minor error in the wiring diagram ... DB8 on the display is on pin22 not 21.

Thanks
Phil

Title: Re: NHDev Development Board with NHD-2.4-240320CF-CSXN#-F
Post by: Saurabh_B on June 28, 2016, 05:00:52 PM
You're right, it is.

I will fix that Thanks.