Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: daota on July 05, 2016, 01:26:46 PM

Title: Sample code and eschematic
Post by: daota on July 05, 2016, 01:26:46 PM

Hello !

I'm new here ... I'm starting a project with TFT display with capacitive touch screen ! But still I do not know very well how to start and where to start!

We have our controller card , use an NXP , MCF51QE128 .. I purchased a NHD - 4.3-480272MF -20 Controller Board and a TFT display with capacitive touch screen ...

However , I need guidance on how to link the items , noting that not even know how to get the images to be displayed on the TFT , I believe that for a sdcard ?

Could someone tell me where to start ???

Sooooo thank you!

Title: Re: Sample code and eschematic
Post by: Saurabh_B on July 08, 2016, 12:06:26 PM

HI,

You would need to connect the display to the controller board, then from there the controller board would need to be tied to your processor.

The connections would depend on the ports and pins on the display itself.

To show an image on the display you could use the code here as a starting reference:
Arduino Code: http://www.newhavendisplay.com/app_notes/Arduino_nhd-4_3-480272EF.txt
Code Snip: http://www.newhavendisplay.com/app_notes/TFT_43M.txt

Title: Re: Sample code and eschematic
Post by: daota on July 11, 2016, 06:14:48 AM

Hi Saurabh_B,

Thank you for the references!!! For sure will help me start this project!

Thank you very much,