Newhaven Display Forum

Newhaven Products => Graphic LCDs => Topic started by: JalilB on November 07, 2016, 09:55:58 AM

Title: NHD-C160100DiZ
Post by: JalilB on November 07, 2016, 09:55:58 AM
Hi,
I'm using the NHD-160100DIZ-FSW-FBW. I would like to know if it's possible to configure grey level in order that I send data to be displayed only one time. (Actualy I have to send each data 4 times).

Best regards,

Code: [Select]
do
    {
        BYTE u8i;
        for(u8i = 0; u8i < (A0!=0 ? 4 : 1);u8i++){
            AFF_vdTransmitOneByte(*data);
        }
        data++;
        length--;
    }while(length);

Title: Re: NHD-C160100DiZ
Post by: Saurabh_B on November 08, 2016, 11:57:26 AM
Hello,

This display is only set to work with monochrome.
You would not be able to send different values for the pixels.