Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: Dogus on November 16, 2016, 08:28:22 AM

Title: Question about 256x64 sample code
Post by: Dogus on November 16, 2016, 08:28:22 AM
In the provided code snippet , there are some parts that neither my compiler nor i, can understand .

Link to the code : https://www.newhavendisplay.com/app_notes/OLED_25664.txt

  case 1:
         Src_Pointer=&Ascii_1[(b-1)][0];
         break;


Ascii_1 array was never defined, should i create a global ascii table array in order to make this function work ?

  Set_Column_Address_25664(Shift+c,Shift+c);


Both of these lines are in void Show_Font57_25664() function. I am trying to port this code to a pic MCU . How can i find the missing variables ?

Title: Re: Question about 256x64 sample code
Post by: Saurabh_B on November 16, 2016, 03:13:30 PM
Some of these commands are required for our NHDev Development Board code.

I do have example Arduino code for this display, could you please email me at sbaxi@newhavendisplay.com for the examples.