Newhaven Display Forum

Newhaven Products => Evaluation Tools => Topic started by: jandrade on February 16, 2017, 10:22:28 AM

Title: Unable to detect NHdev board target using J-link
Post by: jandrade on February 16, 2017, 10:22:28 AM
Hello. I am trying to re-program the NHdev board but the target is not being recognized using J-link from SEGGER. The touch screen display is working fine and I am able to see the images loaded from the SD card. I was able to successfully use the J-Link on another board (not from New Haven) with no problems. Here's the equipment I have.


Here's a screenshot from the J-link command. You can see the version of Jlink being used.

(http://imgur.com/Rz2APHD)

http://imgur.com/Rz2APHD (http://imgur.com/Rz2APHD)


As you can see, it cannot detect the target. I tried scanning the target using MDK Keil uVision 5 as well but same result. Any feedback would be appreciated.