Newhaven Display Forum

Newhaven Products => Graphic LCDs => Topic started by: marien on May 08, 2017, 09:02:21 AM

Title: NHD-C12864LZ in parallel mode initializing
Post by: marien on May 08, 2017, 09:02:21 AM
Hi all,

I start to work om this NHD-C12864LZ COG display with the ST7565R mpu in 6800 series mode.
On which edge is the data captured by the display? I tried several things, but until now I see nothing on the display.
When:
- RES is 0
- R/W is 0
- E is 1
the data written to the display will then captured on the rising edge of the CS1?