Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: Racurs on May 17, 2017, 05:40:13 AM

Title: How work with NHD-0216AW-SB3
Post by: Racurs on May 17, 2017, 05:40:13 AM
Good afternoon! I want to use the NHD-0216AW-SB3 display in my design, but having looked at the instruction set I do not understand how to form them. For example, D / C #, R / W # signals for displays with a SPI interface are not available at all. Is the correct datasheet posted on the site for this display? Is it necessary to somehow generate signals IS, RE, SD?
Title: Re: How work with NHD-0216AW-SB3
Post by: Saurabh_B on May 17, 2017, 04:30:14 PM
Hello Racurs,

The datasheet is set up properly. The D/C# and R/W# bits are set when sending the initial data.
The information for this can be found on page nine of the controller datasheet (LINK (http://www.newhavendisplay.com/app_notes/US2066.pdf)).

Please also note that when sending data to this display I you do need to break each byte into half and send 4 bits at a time. This is also explained on page ten of the controller datasheet linked above.