Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: Engineers on August 03, 2017, 01:03:11 AM

Title: NHD-10.1-1024600AF-LSXV-CTP #SUPPORT
Post by: Engineers on August 03, 2017, 01:03:11 AM
HELLO ALL,

WE HAVE PURCHASED NHD-10.1-1024600AF-LSXV-CTP, NEED BASIC SOFTWARE FOR IN-BUILT CONTROLLER PROGRAMMING...

SEARCHED IN SITE BUT COULDN'T FIND ANY DATA PLEASE SHARE WITH OR SEND LINK FOR ABOVE..

Title: Re: NHD-10.1-1024600AF-LSXV-CTP #SUPPORT
Post by: Saurabh_B on August 03, 2017, 09:02:16 AM
Hello,

This display does not come with a built in Controller.
Can you tell me what MPU you are using to write to the display? Also does your MPU support a LVDS controller?
Title: Re: NHD-10.1-1024600AF-LSXV-CTP #SUPPORT
Post by: Engineers on August 04, 2017, 05:00:05 AM
which MPU we can use? according to you..
Title: Re: NHD-10.1-1024600AF-LSXV-CTP #SUPPORT
Post by: Engineers on August 05, 2017, 05:09:55 AM
controller board not available for  NHD-10.1-1024600AF-LSXV-CTP, controller board avilable till NHD-7.0 so is it support NHD-10.1-1024600AF-LSXV-CTP??
Title: Re: NHD-10.1-1024600AF-LSXV-CTP #SUPPORT
Post by: Paul_B on August 10, 2017, 03:45:07 PM
Afternoon,

Please note that the NHD-10.1-1024600AF-LSXV#-CTP does not utilize a "controller board".

The TFT display uses a LVDS interface. LVDS is quite straight forward, and is just parallel data serialised 7:1. The RGB, DE, and syncs go in defined places.

Does your source output LVDS?

Thanks!