Newhaven Display Forum
Newhaven Products => TFTs => Topic started by: skmfg on October 17, 2017, 02:30:25 AM
-
Hi, I have an Arduino Mega 2560 and the NHD-4.3RTP-SHIELD-N display.
Instead of plugging the shield in, I would want to connect them via wires.
Which pins on the shield need to connect to the Arduino.
Thanks a lot!
-
Morning,
The 'Pin Description' is listed in the NHD-4.3RTP-SHIELD-N datasheet ( see page 8 ).
http://www.newhavendisplay.com/specs/NHD-4.3RTP-SHIELD-N.pdf
Hope this helps ;)