Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: cbrun17 on December 17, 2017, 02:22:27 PM

Title: Example MikroC code for NHD-0216AW-IB3 I2C
Post by: cbrun17 on December 17, 2017, 02:22:27 PM
Hello,

After reading datasheets for the NHD-0216AW-IB3 and US2066 controller, I am no closer to getting this display to work. Frankly, I have no experience with Arduino yet all I find are examples written using Arduino code and libraries. I am looking for a simple "Hello World" example in either MikroC (preferable) or xc8.

Thank you in advance for assistance.

Chris 
Title: Re: Example MikroC code for NHD-0216AW-IB3 I2C
Post by: Saurabh_B on December 19, 2017, 05:23:30 PM
Hello Chris,

I'm sorry we do not have any example codes in MicroC or xc8.
Many of the i2c examples do use the Wire.h library, however we do have an example where we are bit banging the data to make it easier to follow.

Would you be able to email nhtech@newhavendisplay.com for this, we would be able to provide this to you.