Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: dfansler on January 11, 2015, 05:54:01 PM

Title: How do you set the SED1963 to 8080 mode?
Post by: dfansler on January 11, 2015, 05:54:01 PM
The SED1963 data sheet you set the "conf" line to define if the SED1963 is in the 8080 or 6800 mode.  In that the NHD‐7.0‐800480WF‐CTXI#‐T does not have the "conf" line, how do you tell the SED1963 which mode to use?
Kind regards,
David
Title: Re: How do you set the SED1963 to 8080 mode?
Post by: Michael_L on January 12, 2015, 08:44:00 AM
You are correct, that signal is not available to the user.  The NHD‐7.0‐800480WF‐CTXI#‐T is configured for 8080 mode.