Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: bluemountain on January 13, 2015, 05:43:10 PM

Title: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
Post by: bluemountain on January 13, 2015, 05:43:10 PM
We're looking to use the NHD-0216CW-AB3 display due to it's improved operating range (low-temp) versus LCD displays we now use.  Our current design provides 3.3V for the display.  The NHD-0216CW-AB3 is rated at 2.8V recommended with 3.6V being the max voltage when not using the on-board regulator.  Is it safe provide 3.3V power/logic for these displays long-term?
Title: Re: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
Post by: Michael_L on January 14, 2015, 10:04:52 AM
Yes, it is absolutely safe to run these displays at 3.3V long-term.
Title: Re: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
Post by: bluemountain on January 14, 2015, 12:19:16 PM
Thanks for the prompt replay Michael_L.  This display looks ideal to replace the one we're currently using so that is indeed good news.