Newhaven Display Forum

Newhaven Products => TFTs => Topic started by: B3-Man on March 17, 2015, 08:05:26 AM

Title: Viewing Angle 6:00
Post by: B3-Man on March 17, 2015, 08:05:26 AM
Hello!

We are planning a design with the NHD‐2.4‐240320SF‐CTXL#‐FTN1, which is a 6:00-type.
In the mechanical Drawing (Datasheet page 3), it seems the arrows showing the optimal viewing direction are contradictory: the view in the upper-left corner shows an arrow pointing "up", while the next view (side-view) shows an arrow pointing "down". I would expect the arrow in the side-view to be correct. Is that true?

Regards,
  Martin
Title: Re: Viewing Angle 6:00
Post by: Retheesh_M on March 17, 2015, 04:16:56 PM
The arrow shown in the side view was incorrect.  Since the display has a 6:00 view, the arrow should be pointing up.  We have updated the specification sheet accordingly and the latest version will be available online tomorrow.
Title: Re: Viewing Angle 6:00
Post by: B3-Man on March 20, 2015, 08:07:03 AM
Thanks for the quick reply!

So I could start my layout now... (if it wasn't friday and I worked already lots of overtime this month :-) )

  Martin