Newhaven Display Forum

Newhaven Products => Character LCDs => Topic started by: sbrad on June 15, 2015, 04:28:00 PM

Title: Repalcing NHD-0420D3Z-FL-GBW v1.0 with v3
Post by: sbrad on June 15, 2015, 04:28:00 PM
Having problems with the display on a piece of equipment that has the version 1.0 board, will I be able to just install the v3 board in it's place with no modifications?
Title: Re: Repalcing NHD-0420D3Z-FL-GBW v1.0 with v3
Post by: Michael_L on June 16, 2015, 02:21:56 PM
It is possible this will work, depending on your current timing.  The V3 firmware is more robust, but has longer execution times for each command.  Delays may need to be added after send commands / data to the display.