Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nathanbabu

Pages: [1]
1
Dear Sir,

Parallel Mode 4 Bit Interface we are using. It is working fine in Arduino but not able interface with 32 bit microc ontroller.

2
Dear Sir,

            I trying to interface with NHD - 0420DZW - AB5 with my micro controller but not able to get good results.

kindly provide some sample program for testing.

thanks in advance .

Nathan Babu

3
OLEDs / Re: Reg: NHD-0420DZW DZW SPI Interface with Arudino
« on: December 30, 2016, 05:14:07 AM »
OLED Found Working sir but i have to send values from the register that i read from analog.

How i can able to give that to OLED Display.

In that only 1st and 3rd line displays data other 2 lines missing. Is there any thing i want to modify from your code example.

Regards,
Padmanathan.P


4
OLEDs / Re: Reg: NHD-0420DZW DZW SPI Interface with Arudino
« on: December 30, 2016, 03:27:17 AM »
Kindly Send command register  and Data registers to write data to OLED via SPI.

On Your example is not working for me in NHD-0420DZW with Arduino and as well in ATMEGA328p using ATMEL STUDIO.

Kindly Help me on this issue.

Regards,
Padmanathan.P

5
OLEDs / Re: Reg: NHD-0420DZW DZW SPI Interface with Arudino
« on: December 29, 2016, 09:11:40 PM »
Hi Sir,
         Thanks for your reply. Send me if you have any arduino sample code for Serial OLED Display using SPI

Regards,
Padmanathan.P

6
OLEDs / Re: NHD-0420DZW-AB5
« on: December 29, 2016, 09:08:18 PM »
Hi Sir,

        Thanks for your reply.

Did you have any reference code for arduino

Regards,
Padmanathan.P

7
OLEDs / Re: NHD-0420DZW-AB5
« on: December 29, 2016, 06:01:34 AM »
Thanks for your reply..

Kindly provide sample code for SPI Interface. And i am modified Jumper settings as per the Specification sheet in your website.

And  I am using arduino for this interface programming.

Regards,
Padmanathan.P

8
OLEDs / Reg: NHD-0420DZW DZW SPI Interface with Arudino
« on: December 29, 2016, 05:54:48 AM »
Kindly Help me to solve this issue.

I am not able to display any thing on OLED using SPI Interface.

Provide Some sample code for interface

9
OLEDs / NHD-0420DZW-AB5
« on: December 27, 2016, 05:11:08 AM »
Hi Sir,
         I want to use the OLED using I2C Concept Please provide sample code and Connection diagram for hardware connection between arduino and our OLED Display.

Thanks & Regards,
Padmanathan.P

Pages: [1]