Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - mrupprath

Pages: [1]
Evaluation Tools / Re: NHD-FT81x-SHIELD
« on: February 14, 2018, 11:13:09 PM »
"All software relating to the NHD-FT81x-SHIELD and the Arduino are supplied from FTDI Directly, and are not created nor
maintained by Newhaven Display International, Inc"

I wonder why you are providing an own repository when you think you are not responible if  content is running with your products or not.
Working reference applications would be very hellpfull to test your products.

Two make a long story short:
I wan't know which arduino module , in conjunction with which ardino ide version , and the FT81x shield, you recommend to use the 7 inch capa touch examples from your repository to test
this display:NHD-7.0-800480FT-CSXV-CTP

Thanks in advance


TFTs / Does NHD-FT81x-SHIELD support Arduino due ?
« on: February 13, 2018, 01:21:17 PM »
Does the  NHD-FT81x-SHIELD support the Arduino due, and do i have to make changes on the example code when using the icsp header for SPI ?


Evaluation Tools / NHD-FT81x-SHIELD support for Arduino DUE
« on: February 13, 2018, 01:18:41 PM »
does NHD-FT81x-SHIELD support Arduino due,
do i have to make any changes to the examples library for the 7 inch displays from your github repository, when using the ICSP header for SPI ?

Thanks inadvance


Hello Paul,
thanks for your help,it compiles now but the display remains black

I noticed the follwoing:
When i connect the backlickt to +.3.3V  Backlight is turned on
When i then connect pin1 to +3.3 Volt backlickt is switched of.
Display is dark
I measured the current on the Pin 1; it is ca 30mA

I something wrong with my display or is this a normal behaviour on "power up" ?

According to the Examples for the 7 inch modules:
I missed a dicument wich SPI pins are used on the arduino.

Where to find this in the examples ?

Thanks again


TFTs / EVE2 Git repository proting for PIC32MZ,NHD-7.0-800480FT-CSXV-CTP
« on: February 01, 2018, 05:52:52 AM »
Dear all,
i have downloaded the examples for the Eve2 Modules.
I bought NHD-7.0-800480FT-CSXV-CTP, and wan't to use the 7 ich examples with this device
together with PIC32MZ and MPLABX.

Unfortunately there is no examples for PIC and i have to Port the code.
Question does someone have examples for PIC32MX / Or MZ and MPLABX together with 7 Inch EVE2 Modules ?
Can someone give me a hint how to start with porting ?

Thanks in advance

Besides That:
I also tried to use the examples with Arduino due and Arduino IDE latest Versions.

I can't compile the examples duoe to errors according to missing EEPROM.h / Missing avr/EEPROM.h "file not found.
It would be nice if someone can give me a hint how to fix this.

Thanks in advance


Pages: [1]