1
OLEDs / Driving Slim OLED from 3.3V system
« on: February 12, 2015, 07:32:43 AM »
I'm looking at using one of the new slim OLEDs that use the US2066 driver IC. I want to run the display from a PIC microcontroller that's running at 3.3V which previous comments have stated is OK to do. Please can you:
1. Confirm that the logic lines can just be connected directly to the PIC
2. Clarify what should be connected to VDD and REGVDD to run at 3.3 volts
1. Confirm that the logic lines can just be connected directly to the PIC
2. Clarify what should be connected to VDD and REGVDD to run at 3.3 volts