Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - erps

Pages: [1]
1
I need a Digital controller board for 5.7in TFT displays. 3.3V input. 16-bit parallel MCU interface.

Controller/Driver: SSD1963-16bit

I guess the part number would be NHD-5.7-320240WFB-34 Controller Board ????

I couldn't find it on the website?
Can you quote?

Thanks,

2
TFTs / Vertical colored lines
« on: December 04, 2014, 12:44:02 PM »
Hi:

As a general question, what would be the reason to get vertical colored lines on a display? (see attached)
I am using NHD-5.7-320240WFB-ETXI #-T-1 with SSD1963 controller board.
Display is connected to the STM3221G-EVAL board from ST, FSMC 16-bit interface. I checked the connections and everything looks ok.

Thanks,

3
TFTs / NHD-5.7-320240WFB-ETXI #-T-1
« on: December 03, 2014, 11:36:02 AM »
Hi:

Need code example to drive the TFT display NHD-5.7-320240WFB-ETXI #-T-1 using the SSD1963 controller board.
I am using a STM32F2 microcontroller using FSMC 16-bit interface.
Can you help?
Thanks,

4
TFTs / NHD-5.7-320240WFB-ETXI #-T-1-ND
« on: October 15, 2014, 11:02:03 AM »
Hi:

I need a 32-position flat flex ribbon cable to connection the signals from the display to the uC board.
Do you provide for that?

Another question, the datasheet on page 4 shows connector CON2 as the interface connector. However, on the board it is shown as CON3 (picture attached), which one is correct?

Thanks,

Pages: [1]