Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - l_pochhi

Pages: [1]
1
TFTs / NHD-5.0-800480TF-ATXL# Display timing
« on: April 27, 2017, 05:09:36 AM »
We are using NHD-5.0-800480TF-ATXL#  for our product.
Our hardware interface is as follows:
1. We are using LVDS port from Linux Board (Gatewoeks GW5400 with Ubantu). It has TX0, TX1, TX2 and CLK balanced lines.
2. We are using DS90C364 for converting LVDS to RGB connection of the Display.
3. R0,R1, G0,G1, B0,B1 are at logic zero, because it provides 666 output.
 
We have made the timing settings as per your datasheet.
 
clock-frequency = <40000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hfront-porch = <40>;
vback-porch = <32>;
vfront-porch = <13>;
hsync-len = <48>;   /// Tested with 1 , 10 and 24 also
vsync-len = <3>;

But we are not getting the proper display.

Please suggest proper timing parameters

Best regards

The Display is attached herewith

2
TFTs / NHD-5.0-800480TF-ATXL# Sunlight Readable feature
« on: March 16, 2017, 03:58:32 AM »
Dear sir,

We have short listed the Display NHD-5.0-800480TF-ATXL# for our product Mobile Data Terminal. I am not sure, if this display is sunlight readable. This is essential feature requirement for our product.
Please confirm, NHD-5.0-800480TF-ATXL# is sunlight readable display.

Best regards

Laxmikant Pochhi 

Pages: [1]