Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - GustavoHdez

Pages: [1]
TFTs / Re: Soldering and mechanical attachment
« on: March 10, 2015, 05:45:50 PM »
Ok, Ill try with plastic standoffs.

Thank you very much

TFTs / Re: Soldering and mechanical attachment
« on: March 10, 2015, 03:44:16 PM »
Hello again,

I really appreciate your comments Retheesh_M, you are right, the holes on the FPC are used for aligning when soldering, but since in my design the display will not be mounted on the PCB, I need some information and advices about giving to the FPC stronger attachment, not just with the pads soldered.

My issue is not mounting the display, is related with giving more mechanical security to the FPC along with the soldering pads.

Thank you very much,

TFTs / Soldering and mechanical attachment
« on: March 09, 2015, 03:38:37 PM »
Hello everyone,

Im using a NHD-1.8-128160EF-CTXI#-T screen for a development of a portable device.

We are currently designing the electronic board (PCB) and we need information about the mechanical attachment of the screen.
We have seen that it has a couple of holes which are used for this intention.

I need to know what kind of tools or mechanical fastener I need to attach the screen to the PCB.

Hope your answers and advices.

Thank you very much,

[attachment deleted by admin]

Pages: [1]