1
TFTs / Re: NV3035C Dot Clock Lower Timing 6.1MHz
« on: June 05, 2017, 02:37:51 PM »
Found my main problem here: PWM of the backlight. Had that at 120Hz. Changed it to 800Hz and this is showing steady now.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
TFTs / Re: NV3035C Dot Clock Lower Timing 6.1MHz
« on: June 05, 2017, 01:56:03 PM »
I've clocked this at 30MHz here (accidentally) and besides the streaks on the screen, I'm getting a nice stable display. Surprised this runs at all, but I'll take it.
Clocking this at 7.4MHz, I get noticeable flicker.
According to the docs on this, the NV3035C is supposed to come up in "reasonable" settings for this so I haven't done any init code in it, just reset and allow it to do it's thing.
I'm thinking that this should be a nice stable display at this rate and with those default settings. Maybe this should be set to something else?
Clocking this at 7.4MHz, I get noticeable flicker.
According to the docs on this, the NV3035C is supposed to come up in "reasonable" settings for this so I haven't done any init code in it, just reset and allow it to do it's thing.
I'm thinking that this should be a nice stable display at this rate and with those default settings. Maybe this should be set to something else?
Pages: [1]