Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TimHamilton

Pages: [1]
1
Evaluation Tools / Re: NHDev and 2.4" TFT
« on: July 21, 2014, 12:46:03 PM »
I have the display up and running. Thanks!

2
Evaluation Tools / Re: NHDev and 2.4" TFT
« on: July 21, 2014, 10:22:42 AM »
Yes, both push buttons are pushed down. I ordered the items separately  because i did not need the headers or the SD card reader.

I have been checking the ribbon cable that came attached to the dev board and am comparing it too the wiring diagram in the link below:

http://www.newhavendisplay.com/nhdev/WiringDiagrams/2_4-240320SF-CTXI.bmp

My first concern is that pin 8 IOVCC is not connected on the ribbon cable but shows connected on the diagram.

-Tim

3
Evaluation Tools / NHDev and 2.4" TFT
« on: July 21, 2014, 10:03:07 AM »
I received my NHDev kit and and a 2.4" TFT Display PN: NHD-2.4-240320SF-CTXI#-F1 and I have not been able to get the screen to work.

NHDev Jumpers are set is follows (came shipped this way):
CN2 - 3.3V
CN3 - 3.3V
CN4 - VDD

When connecting the FFC from the display to the NHD-FFC40 should the silk-screen print numbers(pin designators) face up, away from the board, or down, towards the board?

Pages: [1]