Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - sigitronic

Pages: [1]
1
OLEDs / Lower Limit for SPI-Clock Cycle?
« on: March 27, 2015, 06:01:48 AM »
Hello
I'm working with a NHD-0216CW display in SPI mode and had some problems to bring it up and running in the last days. Finally, the problem was a mistake in the datasheet in the power-supply section, but before I found this issue, I tended to believe I made something wrong in the SPI-protocol. In cases like this, it's very helpful to have the possibility to go stepwise through the programcode and observe signals statically. In the datasheet I see a lower limit for the clock period of (20us) when using the SPI-interface mode. Is this a typo or is it a fact that the design of the SPI-interface is NOT statically? After everything worked, i dramatically slowered down the bus speed just to see if it still works and it did. (Of Course, it makes no sense to use the display with such a bus speed except for debugging. E.g. in the I2C- definition, there is no given lower limit for the Clock cycle)   

Regards
Matthias

Pages: [1]