Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jimmy_sayavong

Pages: [1]
1
OLEDs / Re: NHD-2.7-12864UCY3 brightness/contrast adjusting
« on: January 24, 2016, 04:04:56 PM »
Michael,

I tried your code per the posted file: OLED_25664.txt  and apparently I cold not get the display to be ON at all -- nothing showing up on the display !!.
I check the hardware many times, I am almost certain that the Hardware is fine.  It must be software related issue.
Question for you is regarding the two functions:  void oled_Command_25664(unsigned char Data), and  void oled_Data_25664(unsigned char Data)
I did not see any delay to slow down the SCLK signal at all, it is possible that my CPU might be running too fast for the display?  that is the
only thing that I can think of why it did not work for me.

I am testing the display:  NHD‐2.8‐25664UCB2   

Please advise, and thank you in advance,

JIMMY


2
OLEDs / Re: NHD-3.12-25664UCY2 flickering
« on: January 24, 2016, 09:51:48 AM »
Can you post your initialization code here to see if I can duplicate your issue?
I assume this is for SSD1322 controller, right?

JIMMY


Pages: [1]