Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rbairos@gmail.com

Pages: [1]
1
OLEDs / Re: NHD-1.5-128128UGC3 Maximum Frame Rate
« on: February 09, 2016, 08:51:29 AM »
Maybe a simpler question:

Does anyone have this module, willing to set the mux to 64 (instead of 128), and seeing if it generates a stable (though half) display?

Something like:

oled_Command_128128RGB(0xA8); //set multiplex ratio
oled_Data_128128RGB(63);  // mux = 64

10.1.12Set Multiplex Ratio (A8h)
This command switches default 1:132 multiplex mode to any multiplex mode from 16 to 132. For example,
when multiplex ratio is set to 16, only 16 common pins are enabled...


2
OLEDs / NHD-1.5-128128UGC3 Maximum Frame Rate
« on: February 08, 2016, 02:13:52 PM »
Hello. I'm trying to achieve 96x64 color resolution at  256 frames per second.

If I use NHD-1.5-128128UGC3  (SSD1353)

Am I correct in assuming I can use this module if I set the mux to 64 n(down from 128) and only update 96 columns (down from 128) ?

My calculation:

Fosc = 2.8Mhz
D = 1
K = 147
M = 64
Frm = 297.6  Frames per second


Similarly, I can update the screen in time:
1,000,000,000 nanoseconds / 300 nanoseconds per write / 2 bytes per pixel = 1.666 megapixels per second 
/ 256 refreshes = 6510 pixels per refresh

6510 pixels = 96 * 67.8   (or about 5% breathing room).

Are there any issues with refreshing the pixels that fast?

Thank you very much!
Rob.


PS. Your captcha verification is extremely hard for me to decipher! ;)

Pages: [1]