Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - msp-ssi

Pages: [1]
1
OLEDs / Re: NHD-0220DZW-AY5, spi, beaglebone
« on: November 10, 2014, 02:33:43 PM »
This issue got resolved.

Handling the pins as GPIO pins and explicitly clocking in the data instead of trying to treat the display as an SPI device solved the issue.

2
OLEDs / Re: NHD-0220DZW-AY5, spi, beaglebone
« on: November 03, 2014, 03:50:48 AM »
A logic zero is 0,196 V and a one is 3,235 V.
Supply voltage is between 3,294 V and 3,313 V.

3
OLEDs / NHD-0220DZW-AY5, spi, beaglebone
« on: November 02, 2014, 04:11:05 AM »
I'm trying to get an NHD-0220DZW-AY5 OLED character display to work with a Beaglebone black over SPI.

The display module jumpers are configured for serial mode and I'm sending the commands listed in the datasheet over SPI. So far, I'm not seeing any life signs from the display, it's just dark. I've used a logic analyzer to check what is being sent over the serial lines.

Has anybody been able to get this display to work in serial mode? Any help or pointers are appreciated. I'm attaching the output from the logic analyzer for the first command in the initialization sequence. (The rows are MOSI, MISO, Clock, Enable in that order and the clock is running at 1.5 MHz.)

Thanks!


Pages: [1]