Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tony

Pages: [1]
1
Graphic LCDs / Re: NHD-C12864KGZ-FSW-GBW Readability problem
« on: March 28, 2014, 03:50:37 PM »
It was a soldering issue on my FFC connector. I really appreciate your lightning fast response!
Tony

2
Graphic LCDs / NHD-C12864KGZ-FSW-GBW Readability problem
« on: March 27, 2014, 08:05:57 AM »
Hello,

I am using the above LCD in one of our prototypes. The short cable on this LCD doesn't allow us to install it in the enclosure we have so I made a small PCB with two FFC connectors to be able to extend it. When I plug in the LCD direct to the main board it works perfectly. When I plug it into my extender board with a 5" FFC cable I can see the text but it is faint and doesn't have the contrast like when it is plugged in direct. I checked 3.3V thinking it may have dropped due to the added cable length and connections but it is fine. All the connections are ok between the main board and the 2nd FFC on the extender board. Are there any suggestions for what I could check or a particular issue that would cause the display to still work but be faint? Or are there any other issues using this cable extension approach that would make this not possible?

Thanks,
Tony

Pages: [1]