Product Change Notification  /  04/30/2021

This notice is to inform you of a change to the following products:

• NHD-0216K1Z-FSW-FBW-L
• NHD-0216K1Z-FSW-FBW-L-MPC
• NHD-0216K1Z-FSW-FBW-LEI

The PCB, Glass, Bezel, and Backlight used in the manufacturing of these displays have been redesigned to improve quality performance and long-term manufacturing sustainability.

• PCB: Component layout changed. No change to connector pinout or position.
• Glass: Liquid crystal changed. No change to active area or character size/position.
• Bezel: Locking tab dimensions changed. No change to overall L x W x H dimensions.
• Backlight: Mechanical structure changed. No change to input power requirements.

The changes described above should not have any impact on the part’s electrical or mechanical compatibility within your system. All our testing has found the new displays to be compatible with existing platforms driving the old displays. We fully expect the new displays to fit and function without any issue for our customers.

The new displays will be labeled with a Rev1A identified after the part number.

Drawings and photos comparing the old and new designs are included at the end of this notification.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design.

Samples may be requested by contacting us at nhtech@newhavendisplay.com.

When requesting samples, please specify that your inquiry pertains to the new Rev1A version.

Please visit our website or email nhtech@newhavendisplay.comfor further information or assistance with this change.

Product Change Notification  /  02/08/2021

This notice is to inform you of a change to the following OLED products:

• NHD-2.7-12864WDW3
• NHD-2.7-12864WDW3-M
• NHD-2.7-12864WDY3
• NHD-2.7-12864WDY3-M
• NHD-2.7-12864WDY3-RS
• NHD-2.7-12864WDY3-SL20

The bezel has been redesigned to improve module assembly and installation processes. Bezel width on the top side has increased from 74mm to 74.2mm. Bezel width on the bottom side has decreased from 74mm to 73.4mm. The decrease in width on the bottom side of the bezel results in greater clearance to use the bottom left and bottom right mounting holes on the PCB.

Drawings and photos comparing the old and new designs are included at the end of this notification.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design. Samples may be requested by contacting us at nhsales@newhavendisplay.com. When requesting samples, please specify that your inquiry pertains to the new version. To obtain the full datasheet of the new version please contact our engineering team at nhtech@newhavendisplay.com.

Please visit www.newhavendisplay.com or email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  02/1/2021

This notice is to inform you of a change to the following TFT products:

• NHD-5.0-800480TF-ATXL#
• NHD-5.0-800480TF-ATXL#-T
• NHD-5.0-800480TF-ATXL#-CTP
• NHD-5.0-800480TF-ATXL#-CTP-R19
• NHD-5.0-800480TF-ATXL-CTPME
• NHD-5.0-800480TF-ATXL-CTPKIB
• NHD-5.0-800480TF-ATXL-CTPSS

The manufacturing of these displays has moved to a new production line. As a result of this change, the TFT panel design was revised per the capabilities of the new production line.

This affects the new panel’s voltage requirement, which is accounted for within the updated FPC design and does not require a change to the user’s hardware design.

The FPC size, shape and 40pin connection for the user remain unchanged.

The new version of the display continues to use the ILI6122 driver IC which eliminates any need for the user to make software changes.

The new displays will be labeled with a different revision control number that is printed on the back of the part. See example below.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design.

You may contact your sales representative or email nhsales@newhavendisplay.com with your request for samples.

Please visit our website or email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  05/21/2020

This notice is to inform you of a change to the following LCD product:

• NHD-12864AZ-NSW-BBW-TR

The backlight has been redesigned to improve the connection method for anode and cathode. Old backlight design used thru-hole LEDs with leads that wrapped around the PCB. New backlight design uses surface-mount LEDs, which are connected to the PCB using thru-hole leads.

The new displays will be labeled with a Rev1A identified after the part number.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  04/16/2020

This notice is to inform you of a change to the following products:

• NHD-7.0-800480EF-ASXN#
• NHD-7.0-800480EF-ASXN#-CTP
• NHD-7.0-800480EF-ASXN#-T
• NHD-7.0-800480EF-ASXV#
• NHD-7.0-800480EF-ASXV#-CTP
• NHD-7.0-800480EF-ASXV#-T
• NHD-7.0-800480EF-ATXL#
• NHD-7.0-800480EF-ATXL#-CTP
• NHD-7.0-800480EF-ATXL#-T
• NHD-7.0-800480EF-ATXV#-B
• NHD-7.0-800480EF-CTXL#

The TFT Panel and Driver IC used in the manufacturing of these products have changed for improvements in performance.

The old panel had a contrast ratio of 400:1. The new panel has a contrast ratio of 500:1.

All our testing has found the new display to be backwards compatible with existing systems without the need for any hardware or software modifications.

As with any compatible ICs made by different manufacturers, slight variations in timings and tolerances are present between the old and new driver ICs.

Please use the links below for a detailed comparison.

Old Driver IC Datasheet: HX8264

New Driver IC Datasheet: EK9716

The new displays will be labeled with a Rev1A identified after the part number.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  01/14/2020

This notice is to inform you of a change to the following products:

• NHD-5.0-800480TF-ATXL#
• NHD-5.0-800480TF-ATXL#-T
• NHD-5.0-800480TF-ATXL#-CTP
• NHD-5.0-800480TF-ATXL#-CTPK_RevA
• NHD-5.0-800480TF-ATXL#-CTP-R19
• NHD-5.0-800480TF-ATXL-CTPME
• NHD-5.0-800480TF-ATXL-CTPME

The glass panel and driver IC used in manufacturing of these displays are no longer available. Affected models will now be manufactured using an equivalent glass panel and driver IC. Display FPC has also been redesigned based on the electrical and mechanical requirements of the new glass panel and driver IC.

Driver IC Change:

Old Driver ID Datasheet: ILI6126C

New Driver IC Datasheet: ILI6122

Glass Panel Change:

The new glass panel delivers improved optical characteristics. See comparison below.

FFC Change

FPC width directly below the glass bonding area has been revised. See comparison below.

The new version of these displays will be marked with "Rev1C" suffix at the end of the base display part number printed on the back bezel. See examples below.

We understand that every customer’s application is unique, and therefore recommend you test and validate samples of the updated design.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  12/05/2019

This notice is to inform you of a change to the following products:

• NHD-0216SZW-BB5
• NHD-0216SZW-BG5
• NHD-0216SZW-BY5
• NHD-0216SZW-BB5-TS
• NHD-0216SZW-BG5-SCS

The OLED Panel size has been modified in the models listed above. This change was made for quality improvements to the manufacturing process. The change required a bezel redesign which better secures the OLED panel. The dimensions highlighted below have been modified.

Overall Bezel Height has been reduced from 34.2mm to 31.58mm.

Horizontal Viewing Area has been reduced from 99.0mm to 98.0mm.

Active Area (visible character area) has remained unchanged.

The functionality of the display has not been affected. We understand that each project is unique and therefore recommend you evaluate new samples for validation.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  12/04/2019

This notice is to inform you of a change to the following products:

• NHD-0220DZW-AB5
• NHD-0220DZW-AG5
• NHD-0220DZW-AY5
• NHD-0220DZW-AB5-S
• NHD-0220DZW-AY5-JCA

The OLED Panel size has been modified in the models listed above. This change was made for quality improvements to the manufacturing process. The change required a bezel redesign which better secures OLED panel.

There was no change to form, fit or function of the displays. We understand that each project is unique and therefore recommend you evaluate new samples for validation.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.

Product Change Notification  /  01/17/2019

This notice is to inform you of a change to the following products:

• NHD-10.1-1024600AF-ASXV#-CTP
• NHD-10.1-1024600AF-LSXV#-CTP
• NHD-10.1-1024600MB-LSXV-CTP
• NHD-10.1-HDMI-A-RSXV-CTU

The Capacitive Touch Panel (CTP) for these displays has been redesigned to center the FPC cable with additional anchor points, and to add TVS diodes on the I/O lines.

Aside from the difference in appearance, the revision number printed on the back of the FPC cable can also be used to confirm which version you have.

We understand that each project is unique and therefore recommend you evaluate new samples for validation.

Please email nhtech@newhavendisplay.com for further information or assistance with this change.